Product List

With a 5.5mm top width – the lengths are all 2440mm. For defining lower edges, from flush up to 125mm visible. Easy to shape, and great value.

With a 7.5mm top width – the lengths are all 2440mm. For extremely strong defining lower edges, suited for commercial applications, in heavily trafficked areas. For extra demanding retaining applications in the taller profiles. Also great for long straight lines, due to extra stability.

*All Items marked are made to order, please allow up to 5 business days manufacturing lead time

With 6.5mm top width – lengths are all 2440mm. For strong defining lower edges, for driveways or commercial applications. For retaining applications in the taller profiles.
Perfect for flowing curves and straight lines.

*All Items marked are made to order, please allow up to 5 business days manufacturing lead time

From flush defining edges to 450mm retaining walls the FormBoss® stake range allows you to choose a stake size that is best suited to your
needs. Three stakes per length is the standard recommendation, however long straight lines or heavy retaining may require more stakes. The stakes are precision laser cut and made to perfectly fit under the top rolled lip of the
edging.

Stakes do not require fasteners at the top of the edge due to the lip design. They are secured with tek screws at the bottom of the edging,
just below the soil level.

Rivets are required above ground level to secure stakes when using 290mm, 390mm and 580mm profiles for a clean professional finish
added.

Stakes should be approximately 2x to 3x the profile height depending on soil type and application.

Suits FormBoss® profiles from 75mm to 185mm. Use one tek screw below soil level to secure each stake. All stakes are supplied with screws.

Made from 3mm gauge steel (30mmx50mm/90ºangled), are stronger than “star pickets”, and integrate perfectly with the FormBoss® edging system. The right angle 30mm ridge providing extra retaining support. The 400mm and 600mm stakes require two screws, side by side, below soil level. The 800mm stakes also require a rivet halfway up to stop bowing. When using the 1200mm stakes and 580mm edging we recommend two rivets, one approximately 200mm from the top and one approximately 400mm from the top. All rivets and screws are supplied with the stakes.

*All ZAM Angled Retaining Stakes marked are made to order, please allow up to 5 business days manufacturing lead time

Corner pieces are a 610mm length of edging with a bend in the centre, creating a perfect 90-degree corner piece, that attaches to the edging with the provided connectors. Corner pieces start at 100mm and go up to 580mm.

Please select internal (IN), which has the rolled lip on the inside of the bend or external (OUT), which has the safety lip on the outside of the bend. Galvanised and ZAM® corners are made to order and manufacturing lead times apply*.

Where stakes cannot be used to support FormBoss® products, such as roof top gardens and decking areas, L-shaped angled brackets should be used. As with the stakes, the brackets slip under the rolled top lip and are secured to the edging using either self-taping screws or rivets. To secure the angled brackets to the ground, Dynabolts™ are the preferred option, if this is not practical
a strong adhesive can be used as a substitute.

L-shaped angled brackets elevate edging slightly to allow for drainage. Brackets should be at least 5mm higher than the edging profile to provide sufficient drainage.

Corner Piece 305mm X 305mm Lip Outside Variation

Please note: All Corner Pieces are made to order, please allow up to 5 business days manufacturing lead time

Corner Piece 305mm X 305mm Lip Inside Variation

Please note: All Corner Pieces are made to order, please allow up to 5 business days manufacturing lead time

Rounded Corner Piece 305mm X 305mm Lip Inside Variation

Please note: All Corner Pieces are made to order, please allow up to 5 business days manufacturing lead time

Unjoined Gal and ZAM® are made to order and require ~10 business days
manufacturing lead time Galvabond® and Redcor® rings 75mm to 185mm are 1.6mm gauge and 230mm to 850mm are 2.0mm gauge. All ZAM® rings are 2.0mm gauge.

Supplied unjoined, Gal and ZAM® are made to order and require ~10 business days manufacturing lead time Galvabond® and Redcor® rings 75mm to 185mm are 1.6mm gauge and 230mm to 580mm are 2.0mm gauge. All ZAM® rings are 2.0mm gauge.

Supplied unjoined, Gal and ZAM® are made to order and require ~10 business days manufacturing lead time Galvabond® and Redcor® rings 75mm to 185mm are 1.6mm gauge and 230mm to 580mm are 2.0mm gauge. All ZAM® rings are 2.0mm gauge.

All rings are supplied unjoined, unless otherwise requested.

Supplied fully joined with the main ring.

All special production and custom work must be requested via email:info@greenlines.com.au.Please include a sketch and ensure that all
relevant information is included such as: Material finish, profile height, shape, degree of angle for bends or radius for circular items and
length.
All special production work has a manufacturing lead time of up to 10 business days, while we endeavour to complete orders ahead of schedule, at peak periods this is not always possible.

*Items marked are made to order, please allow up to 10 business days manufacturing lead time.

Please specify lip inside or outside.